Metal curtain poles and drapery rods are easy to either hung or adjust

Hanging your metal drapery pole or wooden drapery rod is a very easy process. There is an easy anchor plate system that applies to almost all curtain poles and drapery rods. You can use wood pole connector screws or splices to extend the drapery pole and as well create an excellent treatment for your windows drapery hardware. This accommodating and flexible system of installation allows easy future adjustments.

With templates and plates, it is easy to install the drapery pole brackets
Most metal curtain rod brackets and wooden drapery poles normally use a keyhole plate. Manufacturers like Houseparts & Paris Texas drapery hardware normally apply this style. The basic functionality of the keyhole remains the same even though the size and the shape may vary depending on the diameter and the size of the curtain rod or the wooden drapery pole. Some poles normally contain brackets that can mount to the wall directly and then slide the bracket over the adjacent plate. The screws on the bracket reverse should be adjusted to create a tight fit.

Using various metal rods or drapery poles for covering large widths
Most metal curtain poles and wooden drapery poles come in predefined foot lengths such as 16, 12, 8, 6, or even 4 feet. If you have bought a larger pole, you will probably need to cut it down so that it can fit your window size or even join two poles together if the ones you have are too small.

Metal drapery rods are available in more than 12 foot sections. However, it is impractical to very most of these sections to your home without bending them unless you are getting them from a store around your home. This means that you might have to buy small portions and then connect them together which will be more cost effective.
Joined drapery poles or curtain rods are not as strong as a single pole and hence might need you to add a center support to improve their strength if you are supporting a weighty drapery to prevent bowing.

Creating corner or bay styles using hinged elbows for drapery poles
You can always manipulate the end of your poles to create a corner rod or a customer bay of you are using wooden drapery rod.A hinged drapery pole elbow is very instrumental since it can adjust to any angle that you wish. The Paris Texas drapery hardware has many types of pole elbows available which make your complicated window treatment very easy. After fixing the elbow desired attachment, simply slide your drapery pole end to that elbow and make sure it attaches firmly. Then adjust it to the angle of your choice. To ensure that the pole stays where you want them to stay, make sure that you fix the brackets close to the pivot. This will keep them firm.

You should carefully examine your drapery hardware and plan appropriately before installing your drapery poles. A properly fitting pole will not only create the desired picture in your house but it will also be open to adjustments and future modifications. Ensure you only purchase the drapery components that will work with your window. You can take some time to examine where you want to hang your brackets on your window. If your window is too wide, you might need to use a center support depending on the diameter of the pole you are using and the size and weight of the drapery you want to hang. You can install a bracket to the left, the right and the ceiling above the window for effective and balanced support.

Wall installations usually need standard brackets. Always purchase drapery hardware that supports the positioning of your window’s brackets. The drapery rod brackets usually come in complete packages with installation screws. Examine the surface you want to install the screw and make sure it’s right. The drapery hardware manufacturers normally just make standard assets but do not know your windows specific requirements. There is however a huge platform of choice from the given alternatives making it possible for you to come up with your desired choices. Buy a support to fix in joined poles to reinforce the strength and position the joint to be at the point of the center support if possible for more strength.